🚚Free Shipping $250+ | Ships in 2-5 Days (U.S.)

Products

WSD-EMS8W27-LT20 8W Cold Pack Emergency LED Driver, -20°C Rated

RESOURCES & DOWNLOADS

(0 Reviews)

$75.50

Details

Description

The WSD-EMS8W27-LT20 Cold Pack Emergency LED Driver is an extreme-temperature-rated 8W battery backup driver built to operate from -20°C to +60°C (-4°F to 140°F) — well beyond the range of a standard emergency driver — making it a strong fit for cold storage, unheated warehouses, parking structures, and other cold-climate commercial spaces. It pairs with a separate cold-rated Li-ion battery case for flexible installation and keeps LED fixtures lit for a full 90 minutes during a power outage, automatically switching to emergency power when the AC supply is interrupted and returning to normal charging once power is restored. It is UL Listed to UL924 and CSA C22.2 No.141 for both factory and field installation.

  • Extreme-temperature rated: operates from -20°C to +60°C (-4°F to 140°F), well beyond the 5°C-50°C range typical of a standard emergency driver — suited for cold storage and unheated cold-climate installations
  • Separate cold-rated Li-ion battery case (not just a cold-rated cable) for maximum installation flexibility
  • Constant power emergency output
  • Emergency runtime: 90 minutes; output voltage 30-60V DC; emergency output power 8W
  • Universal input voltage: 100-347V AC, 50/60Hz; input current 100mA max; input power 7W max
  • The connected AC LED driver’s output cannot exceed 4A
  • Battery protections: overcharge, over-discharge, and short-circuit protection
  • Battery charging current: ≤250mA; recharge time 48 hours (longer than the 24-hour recharge typical of standard-temperature drivers, due to the cold-rated cell chemistry)
  • IP65-rated test switch for protection against dust and water ingress at the switch itself — this does not extend a Wet Location rating to the driver or battery, which remain for dry and damp locations only
  • Compatible with a wide variety of LED arrays and AC drivers
  • M12 Metal test switch, UL 2464 rated cable, 24AWG, 300V, 80°C, 21.65″ (550mm) lead
  • Press the test switch twice to cut off emergency mode for shipment and storage
  • Requires an unswitched AC power source on the same branch circuit as the AC LED driver
  • Do not use outdoors; do not mount near gas or electric heaters; not for use in an air-handling fixture
  • For use with grounded, UL Listed LED luminaires, and the case should be grounded
  • Sealed, non-maintenance battery that is not field replaceable — replace the entire unit if the battery fails
  • Manufacturer advises confirming product/system compatibility before final installation
  • Please charge the battery continuously for >48 hours on first use to activate the full battery cells; recharge for 48 hours every 6 months during storage (maximum 1-year shelf life before recharge is required to avoid battery damage, not covered under warranty)
  • California Energy Commission (CEC) Title 20 Compliant, with BC certification
  • 5-year limited warranty
  • Contains a rechargeable Li-ion battery — must be recycled or disposed of properly
  • UL Listed (cULus, file E530386)

Applications

Emergency backup lighting for LED fixtures in cold storage facilities, unheated warehouses, parking garages, loading docks, and other cold-climate commercial and industrial interiors where a standard emergency driver’s operating range is not sufficient.

Product Attributes

Attribute Value
Brand ONE SOURCE LIGHT
Product Type Cold Pack Emergency LED Driver, Extreme Temperature (WSD-EMS Series)
Output Power 8W
Output Voltage 30-60V DC, constant power
Input Voltage 100-347V AC, 50/60Hz; unswitched AC power source required on the same branch circuit as the AC LED driver
Electrical Input current 100mA max; input power 7W max; connected AC LED driver output cannot exceed 4A
Battery Cold-rated Li-ion, separate battery case; charging current ≤250mA; recharge time 48 hours; sealed, not field replaceable; overcharge, over-discharge, and short-circuit protected
Emergency Runtime 90 minutes, constant power
Controls M12 Metal test switch (IP65-rated at the switch), UL 2464 rated cable, 24AWG, 300V, 80°C, 21.65″ (550mm) lead; press twice to cut off emergency mode for shipment/storage
Construction Driver case 7.4″ x 1.5″ x 1.14″ (188mm x 38mm x 29mm), mounting center 7.0″; separate 8W battery case 3.45″ x 2.27″ x 0.85″ (87.7mm x 57.6mm x 21.6mm), mounting center 3.18″
Environment Rating Extreme-temperature rated: -20°C to +60°C (-4°F to 140°F); operates in normal, damp, and extreme temperature environments; not for outdoor use; test switch is IP65-rated for dust/water ingress at the switch itself, but this is not a Wet Location rating for the driver or battery; must be used with grounded, UL Listed luminaires, and the case should be grounded
Battery Maintenance Charge continuously >48 hours on first use; recharge 48 hours every 6 months during storage; maximum 1-year shelf life before recharge is required to avoid battery damage (not covered under warranty)
Certifications / Listings UL Listed (cULus, file E530386), UL924; CSA C22.2 No.141; CEC Title 20 Compliant with BC certification
Warranty 5 years, limited

Variations

Catalog Number Output Power Input Voltage Battery Type
WSD-EMS8W27-LT20 8W 100-347V AC, 50/60Hz Cold-Rated Li-ion (-20°C to +60°C)

 

There are no reviews yet. Be the first one to write one.

Details

Brochures & Spec Sheets

There are no reviews yet. Be the first one to write one.

0
    0
    Your Cart
    Your cart is empty