Description

The MWP16 is a 90W LED wall pack with an ultra-thin, low-profile design that meets traditional wall pack dimensions while covering the unsightly stains typical metal halide wall packs leave behind. This 90W unit is available with either a clear UV-stabilized polycarbonate diffuser or a glass diffuser, both with a professional prismatic design that controls light distribution and guarantees uniformity. A rugged cast-aluminum housing thermally conducts LED heat for long life, and the fully sealed construction protects against moisture and environmental contaminants outdoors. On-site DIP switches let you adjust both color temperature and output wattage after installation, with an integrated photocell included as standard, so one fixture covers a range of jobsite needs without stocking multiple SKUs.

• On-site CCT adjustment: 3000K, 4000K, or 5000K (80 CRI)
• On-site wattage adjustment across 4 levels: 90W / 70W / 50W / 30W
• Scalable output from 4,800 up to 12,500 lumens depending on the level and CCT selected
• Available with a clear UV-stabilized polycarbonate diffuser or a glass diffuser; both prismatic for light distribution control and uniformity
• Rugged cast-aluminum housing with bronze polyester powder paint for outdoor use; casting thermally conducts LED heat
• Completely sealed housing for excellent protection against moisture and environmental contaminants
• Universal 120-277VAC input voltage
• Integrated photocell included as standard; enable or disable by removing the screw plug and adjusting the internal DIP switch
• Optional 0-10V dimming, 10%-100% dimming range
• Power factor >90%, THD <15%
• Optional emergency battery backup available (8W/900lm/90min pack, shared with the 60W and 120W units)
• Estimated 50,000-hour LED lifespan (IES LM-80 results and TM-21 calculations)
• UL/cUL Wet Location Listed
• DesignLights Consortium (DLC) Premium Qualified, all lumen packages
• 5-year limited warranty

Applications

Exterior wall-mounted general and security lighting for building entrances, loading docks, perimeter walls, and other commercial or industrial applications needing a weather-sealed wall pack with field-adjustable output and color temperature; the 90W level suits larger facades and higher-traffic areas than the 40W size.

Product Attributes

Performance Data (MWP1690W, by Selectable Wattage Level & CCT)

All 12 combinations (4 wattage levels × 3 CCTs) are field-selectable on the same fixture via the internal DIP switches, regardless of which diffuser is fitted — all values are design/typical, measured at 25°C (±5°C) per the manufacturer’s data; actual performance may vary by installation. Driver: 1 driver, 830mA. Input current at 90W: 0.75A (120V) / 0.43A (208V) / 0.38A (240V) / 0.32A (277V).

Variations

Optional Accessories